Implementation of cornice PVC and MDF

Related pages

installing cornice

The ceilings hide the space between the wall and the "flooring" and protect the wall against impact, scratches and any collisions and water, and, of course, it also has a beautiful aspect. Frames are in stone, wood, HDF, and PVC models. Typically, the width of the frames is 7 and 9 cm, and their thickness is usually 17 mm. For smaller spaces, use low-level corridors and for larger spaces, they will use higher-height cornices.
Not too old time, the use of stone fences in buildings was high, beautifully not at all eye-catching and is now in use. The implementation of these cornices is carried out with slurry and cement, and its installation is time consuming and costly.
MDF frames and MDF frames are very diverse in appearance and color. There are different designs on the PVC and MDFs, and they can even look very similar in appearance, and should pay attention to all the other features that make up the proper cornice suitable for use. Features such as weight, impact resistance, cost, moisture and so on. The cornices used in places exposed to water and moisture should be waterproof, such as kitchens, so they do not become deformed over time and do not change color.
Some corrugations are single-wall or double-glazed. Double-glazed frames allow wires and cables to pass through the free space inside the cornice to give a beautiful appearance to the interior, and damage the wires. Today, different cores are produced by different companies, each with special capabilities such as fireproof, rinsing, anti-scratch, anti-insect, anti-insect, etc. depending on the needs and tastes of the people available on the market. The installation of the cornice starts on one side and continues until the end of the work and it is a mistake to disassemble the disassembled device.
Install and run the cornice

Corner execution method

To install pvc and MDF, you must first clean the wall and smooth it. These glue sticks are glued to the wall easily, we stick the back of the cornice and grab it to the wall and then tighten it to the wall with a short nail clipper. In corners and cores, the angle of the wall and the size used for the cornice should be aligned so that after the installation, the cornices are not pressed together and there is no cracking or deformation.
Today, more than PVC, MDF and HDF frames are used. Each of these fences has its own advantages
To select the right color for the cornices, choose a color that matches the flooring. For example, if the floor is wood, usually two or three degrees should be darker than the color of the cornea, or if the floor is not a wood pattern, we will choose the colors of the doors.
When installing, there should be no seam and free space between the cornice and the wall, and the cornice with the floor and the blades of cornices. These gaps are dusty. The ceilings cover the edges of the wall and the "parquet and laminate", for example, "laminate arta" and cover the walls with a shield and they are in a beautiful environment and are placed like a frame around the floor of the house.
Method of installing cornice
Tags: Corner Installer, Corner Install, Corner Installation Method, Corner Installation Instruction, Corner Installation Guide, PVC Corner, PVC Corner, MDF Corner, MDF Corner, Corinthium Color, 9cm Corinth Install, 7cm Corinth Install, 7 cm MDF, 7 cm PVC, 7 cm MDF, 7 cm MDF, 9 cm MDF, 9 cm MDF, 9 cm corrugated PVC, 9 cm PVC, installation cost Corinthium, MDF fence installation fee, PVC fence, Luminescence, Wooden fence, Standby wage
By registering your order, you can easily buy decorations from Iran